Alberta Motorcycle Test 02

The Alberta motorcycle practice test is a crucial step in your journey toward obtaining a driver’s license. As an aspiring motorcycle rider, you must familiarize yourself with the road rules and regulations specific to motorcycles. The practice test offers multiple choice questions that simulate the actual test, giving you a chance to test your knowledge and assess your preparedness

/25

Alberta Motorcycle Practice Test 02

1 / 25

A smooth shift to the next gear is the result of...?

Maintaining steady throttle

Years of practice

Fully releasing the clutch

Coordinating the clutch lever release with a small amount of throttle

2 / 25

Which statement is FALSE? Before starting to ride, be sure your intended path is safe by doing the following...?

Look over your shoulder in the direction you will be moving to check your blind spot

Check that the path in front of you is clear of children, pedestrians, obstacles, and other traffic

Check each mirror

Move your motorcycle to 45-degree angle

3 / 25

Which statement is FALSE? Check that the battery is...?

The proper size

Secure

The connections to the battery are secure

The terminals are clean

4 / 25

When checking the throttle, how should it respond?

It should return to the closed position easily, without assistance

It should return to the closed position easily with assistance

It should remain open until you close it

None of these

5 / 25

What is referred to as the friction zone?

When the connection will begin to engage again while releasing the clutch

When the tires begin to move

When the clutch is disengaged

When the brakes begin to slow the motorcycle down

6 / 25

How do you check the brakes?

Check that the brake dashboard light comes on when applying the brake

Check that each one keeps the motorcycle stopped when you apply the brake fully

Ensure that you need both front and rear brakes applied to fully stop the bike

Ensure that the bike will only move slightly with the brakes applied

7 / 25

Check each tire for adequate tread depth and also look for...?

All of these

Discoloration

Uneven or worn tread

Bulges

8 / 25

Just before stopping you will also need to squeeze the clutch lever for what reason?

To prevent the motorcycle from stalling

To allow you to rev the engine while stopped

To apply the brakes

To change gears

9 / 25

Which statement is FALSE? Check the general condition of the tires such as...?

Bulges

Cracks

Cuts

Scuffs

10 / 25

Where should you keep your feet while riding?

Where ever you find to be the most comfortable

The left foot should be below the gear shift

On the foot pegs

Your right foot should hover over the foot brake

11 / 25

What is the correct riding position?

Your finger tips should be able to reach beyond the hand grips to allow for enough arm movement

Your arms should be at a 45-degree angle when holding the hand grips

Your arms should be as straight as possible when holding the hand grips

So that your arms are slightly bent and not tense when you hold the hand grips

12 / 25

Which statement is FALSE? When checking the lights, check that they all...?

Proper wattage

Are clean

Not damaged

Securely mounted

13 / 25

Which statement is FALSE? Why should you maintain a light but firm hand grip with your left hand?

You will be able to brake more smoothly

You will be able to reach the signal and headlight switches

You can easily reach the horn

It will allow you to access the clutch lever easily

14 / 25

Which statement is FALSE? To prepare your motorcycle for riding, do the following...?

Sit on the seat with a leg on each side of the motorcycle

Continue to keep your feet firmly on the ground

Ensure the motorcycle is in gear

While holding the hand grips, move the motorcycle upright and retract the side stand. Always check that your footing is secure so that you do not lose your balance

15 / 25

How do you check that the instrument lights are working properly?

Turning the key to the ON position

Inserting the key

Starting the engine

You have to flip the switch

16 / 25

What could be an indication of an alignment problem?

Worn or uneven tread

The bike leans to one side

Bent spokes

A bumpy ride

17 / 25

Why should you start with your right wrist positioned with a slight bend down and no higher than flat?

It is more relaxing in that position

All of these

Will prevent you from using too much throttle

It will prevent your hand from slipping off the grip

18 / 25

Which statement is FALSE? If you ride a manual shift motorcycle you will also have to practice proper gear shifting to acquire smooth coordination between...?

The throttle

The brake

The clutch lever

The signals

19 / 25

Which statement is FALSE? When checking the centre stand and side stand, they should...?

The centre stand spring is not broken

The stand should be secure when retracted

There are no cracks or bends

The bike will lean no more than at a 30-degree angle while on the stand

20 / 25

When properly adjusted, a mirror will show...?

Asa much of the road as possible

The edge of your arm or shoulder

None of your body

The lanes next to you or shoulder

21 / 25

What colour is the neutral gear light?

Green

Blue

Yellow

Red

22 / 25

Which statement is FALSE? When checking the wheels and rims, you should check for...?

Loose spokes

Damaged spokes

Thinner spokes

Missing spokes

23 / 25

Why should you press your knees lightly against the motorcycle?

To make the motorcycle more aerodynamic

To help you keep your balance when the motorcycle is moving

All of these

To reduce on wind resistance

24 / 25

Which statement is FALSE? If the motorcycle engine is liquid cooled, check...?

The hoses are not cracked

The hoses are not leaking

The coolant is the proper colour

The coolant fluid is at the recommended level

25 / 25

Do the both the foot and hand brake controls have to activate the brake light?

Yes

Just the foot brake

Just the hand brake

Your score is

Questions In This Quiz

A smooth shift to the next gear is the result of…?
What is referred to as the friction zone?
Just before stopping you will also need to squeeze the clutch lever for what reason?
Which statement is false? Before starting to ride, be sure your intended path is safe by doing the following…?
When properly adjusted, a mirror will show…?
Which statement is false? To prepare your motorcycle for riding, do the following…?
Which statement is false? If you ride a manual shift motorcycle you will also have to practice proper gear shifting to acquire smooth coordination between…?
Why should you press your knees lightly against the motorcycle?
Where should you keep your feet while riding?
Which statement is false? Why should you maintain a light but firm hand grip with your left hand?
Why should you start with your right wrist positioned with a slight bend down and no higher than flat?
What is the correct riding position?
Which statement is false? When checking the centre stand and side stand, they should…?
How do you check the brakes?
When checking the throttle, how should it respond?
Which statement is false? If the motorcycle engine is liquid cooled, check…?
Which statement is false? Check that the battery is…?
Do the both the foot and hand brake controls have to activate the brake light?
How do you check that the instrument lights are working properly?
What colour is the neutral gear light?
Which statement is false? When checking the lights, check that they all…?
Which statement is false? When checking the wheels and rims, you should check for…?
Which statement is false? Check the general condition of the tires such as…?
What could be an indication of an alignment problem?
Check each tire for adequate tread depth and also look for…?